IMPACT For CAD

New

New: Water edges added to stairs. (Case 140463)
New: Wall intent can now be mirrored for sandwich wall. (Case 141158)
New: Two new measurement options available for the recesses: Center X and Center Y. (Case 135127)
New: Synchronize obj files from AutoCAD. (Case 139779)
New: Split Wall in equal parts with command Split Wall. (Case 141034)
New: SHOW_BAR_MESH_IN_SOLID_VIEW & SHOW_BAR_MESH_IN_IFC_SOLID to Reinforcement variables to set if the Bar Mesh should be generated in the Shop Drawing Solid and IFC Solid. (Case 140674)
New: Possible to split the outer panel in two layers with different materials. (Case 138549)
New: Possibility to export multiple elements to obj. (Case 139888)
New: Possibility to add property sets to erection reinforcement. (Case 139890)
New: Insulation material can be set to "none" in wall defintions. (Case 140441)
New: Improved performance for generating IFC solids with reinforcement. (Case 140330)
New: Find components now works on 3D drawings with IFC solid elements. (Case 140239)
New: Creating obj file has been optimized. (Case 140199)
New: Command "Update Objects" should work on 3D drawings with IFC solid elements. (Case 140215)
New: Command "Update Element Mark Text Size" is renamed to "Update Element Mark Text Size and Position" and now also resets the position of the element mark. (Case 140625)
New: CIM duplicates are now highlighted in Shop drawing when taking CIM MTO and when applying CIM template. (Case 100826)
New: Automatic bended mesh supports mesh between inner panel and outer panel. (Case 140352)
New: Added one decimal to Hollow core definition grid values. (Case 140091)
New: Add dimension for Reinforcement sticking out of the beam section geometry. ( Case 138077)
New: Add a new possibility for calculating Actual Reinforcement Area for FormSlab called centerline. (Case 139900)
New: A warning is shown if the user tries to delete or rename a component in use. (Case 138711)

Fix

Fix: where transport id was not shown in the element mark on plan drawings and elevations. (Case 140561)
Fix: where strandpattern text was overlapping the dimension lines for prestressed beams. (Case 140846)
Fix: The Insertion point of the hatch in the endcap was offset. (Case 141000)
Fix: The Column views were not aligned in viewports. (Case 140760)
Fix: Switch Front Side of Columns now places the front indicator, red triangle, in the middle of the section when the command is used. (Case 140356)
Fix: Special case where the number of bars were incorrect for a distribution line segment with a length less than the sum of first and last location. (Case 140970)
Fix: Special case where the annotation lines clashes. (Case 140959)
Fix: Special case where MTO Reinforcement when a layout was active extended the drawing view incorrectly. (Case 140922)
Fix: Special case where mass and volume was incorrect for a stair with surface and landing. (Case 141163)
Fix: Special case where linked element wasn't generated as IFC solid. (Case 141042)
Fix: Special case where a wall with complex geometry got overlapping dimension lines. (Case 140017)
Fix: Reinforcement 3D view placement. (Case 140836)
Fix: Performance improved when changing the height, updating all lifts and when saving and exiting for the elements that were missing opening endcap definitions. (Case 140690)
Fix: Panel Ties are now adjusting in depth. (Case 140442)
Fix: Opening multiple drawings in BricsCAD V25.2.09 frooze the application. (Case 140927)
Fix: Name changed in the FormSlab Reinforcement distribution from "Minimum AS" to "Minimum rc area". (Case 139966)
Fix: MEP keys in DoubleWalls are not added to a level if that is set on the key. (Case 140626)
Fix: LCIM was not shown correctly in print when the column was rotated. (Case 140782)
Fix: LCIM was not displayed correctly when generating elements for IFC export. (Case 140785)
Fix: Issue with plotting shop drawings with the bar mesh drawing view. (Case 141221)
Fix: Insulation file wasn't created for BricsCAD. (Case 141282)
Fix: Insert lift automatically vs insert lift in cut hollow cores chooses different cores. (Case 140783)
Fix: Improved performance when hoovering on Beams and Columns in BricsCAD. (Case 140926)
Fix: Extra lines were added in Column and Beam Shop drawing views. (Case 140357)
Fix: Endcaps where not drawn correctly on wall. (Case 1407769
Fix: Colors in OBJ file created by BricsCAD wasn't correct. (Case 140600)
Fix: Barmesh is missing in the Unitechnik export for Prestressed slabs. (Case 140298)
Fix: "Add to drawing view" in column and beam section. (Case 140769)

Project Manager

New

New: Warning when renaming or deleting a component that is used in the project. (Case 139874)
New: Vehicle column added to the Element ID tab and Element properties. (Case 140153)
New: There is now a number on the unread notifications in Project Manager and Resource Manager. (Case 123822)
New: PXML export for Slabs. (Case 139645)
New: Possibility to filter and sort in File Sync dialogue window. (Case 139862)
New: Insulation Planning settings to decide on color of insulation pieces when printing. (Case 137555)
New: Insulation Planning a possibility for user to set color for text on image in print report. (Case 140096)
New: Improvements to PDF viewer. (Case 73295)
New: Highlight gridline option added. (Case 136010)
New: Export to PCP from Model view. (Case 81318)
New: Element ID filter export/import. (Case 138108)
New: Drawing revision added to drawing notifications. (Case 126696)
New: Changed name from ELiPLAN to Plant Control PCP. (Case 140130)
New: A file sync option for syncing "Production files". (Case 139846)
New: "Only Element Ready for Production" removed from the CRH Export. (Case 140728)
New: "Empty GUID" added to "Find Corrupted Elements". (Case 140141)

Fix

Fix: Wrong geometry of the Double walls in Model view. (Case 140645)
Fix: where lock drawings failed when pdf is newer on disk, drawing should not open. (Case 140749)
Fix: View - Active Tabs - Some of these were unticked while being active. (Case 140637)
Fix: Upper-case letters no longer become lower-case letters when a drawing is deleted and synced. (Case 140159)
Fix: Special case where the material was incorrect in "DS Elcobyg to ERPBOS". (Case 139401)
Fix: Special case where the bar mesh was missing bars in the unitechnik export. (Case 140318)
Fix: Special case where CRH PCP export information became blank after changing the building name and phase. (Case 140154)
Fix: Special case where "element mark import" didn't import. (Case 140775)
Fix: Rough planned dependencies - Planned delivery date changes with fine planning. (Case 140002)
Fix: Resolved issue where drawings could not be opened from the ID grid if the 'drawing' column was not active. (Case 140648)
Fix: OBJ Performance optimisation. (Case 140055)
Fix: Minor changes to Rough Planning Dependencies. (Case 138960)
Fix: merge to a single file with only one PDF did not work as intented. (Case 140332)
Fix: Filter UI error, the drop-down menu under export could not be clicked. (Case 140585)
Fix: Element Status dropdown resets after closing PM. (Case 140556)
Fix: Couldn't make a selection of the elements in model view by holding SHIFT button and drawing a line. (Case 140333)
Fix: Commands needs to be clicked twice to start when the Load Drawing has been initiated in the Insulation Planning Module. (Case 138465)
Fix: Changing design status for elements not working. (Case 140165)
Fix: Calculate erection date. (Case 140041)
Fix : Problems in OBJ files in combination with translation to Dutch. (140338)

Change

Change: Implement None User permission in Element Id Grid in RM and PM (Case 135722)

IMPACT Reinforcement

Fix

Fix: Special case with the mesh marks resulting in an error. (Case 140842)
Fix: Special case where GetCenterLine didn't work. (Case 141146)
Fix: Special case where add hole to a distribution line didn't work correct. (Case 140646)
Fix: Presentation is disabled when drawing bars. (Case 139947)

Report Tool

New

New: Control Status in settings - properties with text replacements added for Approved, Not Approved & N/A. (Case 139789)
New: Add the Specification field Concrete Strength 1 and Concrete Strength 2 to the Table of Element report. (Case 140668)

Fix

Fix: Special case where values from the Drawing Specification imported through Tekla Base Tools didn't end up in the Element label. (Case 140412)
Fix: Special case where a specific project gave an error when printing report table of elements. (Case 140683)
Fix: Special case in Report tool. (Case 141044)

Resource Manager

New

New: Shift is now included in the search for element on cast. (Case 140823)
New: Reject element from disorder. (Case 136543)
New: OBJ Representation setting moved to the modules. (Case 140294)
New: Make a new bed export that calls a function in ICELMS that does a bed export to PXML for IC-Prefab designed elements. (Case 140339)
New: It's now possible to have correct placement of slabs that should be casted upside-down. (Case 139820)
New: It is now possible to show the element mark in the Transport picture. (Case 134858)
New: It is now possible to get measurement from front of the truck/trailer to the placement of the stack if it is not aligned to the front. (Case 138644)
New: Introduced a more efficient way to move elements on stack. (Case 138802)
New: Export filter in Planning. (Case 140566)
New: Add vehicle in the "Element Properties". (Case 140246)
New: Add side lift column to the Planning grid. (Case 139875)
New: "Vehicle" column added in Planning. (Case 139721)

Fix

Fix: Text where not showing the division the element was planed on.  (Case 140692)
Fix: Sorting of element marks was not working as intended in the planning grid.  (Case 140281)
Fix: Set division deactivated when an element is casted. (Case 140528)
Fix: Resolved issue where rejected elements that was planned on transport but was not on waybill or delivered got removed from the transport. (Case 140644)
Fix: Obj Loader - Standard not working properly. (Case 140285)
Fix: Improvement for none option for company and transport permissions . (Case 140584)
Fix: Error in the SBE XML export. (Case 140208)
Fix: Element Control Order. (Case 140484)
Fix: Element color kept when placed between two elements on a bed, update model needed. (Case 138573)
Fix: A save changes warning is needed when leaving a node, and the 'Save' and 'Discard' buttons should have a consistent appearance across all nodes in Settings. (Case 137741)

Change

Change: Transport Planning, Add a warning if the Load date  is before Planed produced date (case 138596)

IMPACT for Revit

New

New: OBJ export settings are now available in Update model function. (Case 139812)
New: It's now possible to upgrade older version Revit families to current version using 'Revit files upgrade' command.
New: It is now possible to use the 'Recess by Intersection' command with linked ducts. (Case 139941)
New: It is now possible to save OBJ automatically. (Case 140859)
New: It is now possible to Multicopy components in IMPACT for Revit. (Case 140439)
New: It is now possible to insert multiple recesses at once by using geometries drawn in Model lines. (Case 89847)
New: It is now possible to flip slabs in x- and y-direction. (Case 140047)
New: IMPACT for Revit have got new parameters. (Case 140433) 

Fix

Fix: Wrong value of one of the parameters in Barmark definition. (Case 140875)
Fix: Wall assembly changes name involuntarily. (Case 140767)
Fix: User defined rectangular recess was not inserted in the second slab with same assembly name. (Case 141159) 
Fix: User defined recess was not inserted in the second wall with the same assembly name. (Case 141101)
Fix: The element mark and assembly name of slabs was changed after inserting recess  or cast in material. (Case 141097)
Fix: Resolved issue where total measurements were not correct. (Case 140892)
Fix: Resolved issue where rebars were not copied when selecting 'Keep Mark'. (Case 140800)
Fix: Issue with saving an element using update model command for walls.
Fix: Issue with copying doors and windows with 'Copy components' command.
Fix: Issue with changing lift placement image when selected different options.
Fix: Issue with 'Apply endcap' command taking time to execute.
Fix: Issue with adjusting CIM edge distance as per geometry of wall when applied as a joint.
Fix: Couldn't save specific slabs in database. (Case 140283)
Fix: Couldn't link a Revit file to an existing project. (Case 140331)
Fix: Couldn't export Shop drawing template from Common to Project level. (Case 139795)
Fix: After adding corbel to column the volume are represented wrong in PM. (Case 139620)
Fix:  Error when using specific Dynamic CIM. (Case 139839)
Fix:  Beam definitions do not have correct shape.(Case 140060)
Fix Recess is not added correct to several beam definitions. (Case 140063)

Tekla Base Tools

New

New: Treatment to a recess UDA can now be imported from TBT. (Case 140405)
New: Settings for .obj files regarding RC, CIM and Strands are implemented in Tekla Base Tools. (Case 140478)
New: Represent the strands in the OBJ file. (Case 140278)
New: Drawing Category UDA is now added to the Tekla Base tools settings. (Case 140770)

Fix

Fix: Service not backward compatible when getting settings. (Case 141037)
Fix: Empty field in the databse was not updated after using UDA. (Case 140263)
Fix: Error when exporting drawings in Tekla Base Tools. (Case 141135)