Show last authors
1 (% class="row" %)
2 (((
3 (% class="col-xs-12 col-sm-8" %)
4 (((
5 = Rules =
6
7 * The distribution line is always drawn all the way to the edge, see figure 1.
8
9 * The distribution line can start/end at an edge or sometimes connect to another distribution line, see figure 1.
10
11 * The calculation is general so that data such as "covering concrete layer" and/or "s/2" do not need to be entered for each end. This also applies to distribution lines with several segments, see figure 2.
12
13 * Normally, the distance s/2 is used for the first and last bar, see figure 3 and 4.
14
15 * The calculation is conservative, and the function adds an extra bar when the last distance exceeds s/2.
16
17
18 (% data-placeholder="Translation" dir="ltr" id="tw-target-text" %)
19 {{{Of course, the bar does not need to be connected to a distribution line, and then the number can be entered manually.}}}
20
21 [[image:Antalstanger3a.gif]]
22
23 //Figure 1//
24
25 [[image:Antalstanger4a.gif]]
26
27 //Figure 2//
28
29 [[image:Antalstanger2a.gif]]
30
31 //Figure 3//
32
33 [[image:Antalstanger3a.gif]]
34
35 //Figure 4//
36
37
38
39 )))
40
41 (% class="col-xs-12 col-sm-4" %)
42 (((
43 (% class="box" %)
44 (((
45 Contents
46
47 {{toc/}}
48 )))
49 )))
50 )))
Copyright 2018 StruSoft AB
Impact Documentation