Add a new column to the hole specification for if the window is mounted in factory
Last modified by Peter Karlsson on 2022/09/26 08:02
In IMPACT 17 you can set that an opening shall be mounted in the factory.
If you like that information to also be present in the hole specification on the drawing.
Added two new variables:
DWGTEXTTABLEHOLEMOUNTEDINFACTORY default "X"
DWGTEXTTABLEHOLENOTMOUNTEDINFACTORY default ""
Added attribute "MOUNTED" in "_ur_hs1.dwg"
You also need to change the header block _ur_007.dwg
If you check the box on the opening.
This is how it looks in the shop drawing.