1664276900324-571.png

“Generate Braces…” allows you to add braces to all wall types and columns.

The braces consist of a new dynamic block that needs to be added to the standard. 
Download with the link above and place in templates_drawings in you common folder.

The braces attaches to the bracing anchors of the wall or column and extends with a specified angle to a point where it intersects the selected slab’s top surface.
At the intersection point with the top of the slab, you can choose to add a bracing anchor (cim) or a new standard symbol that can be converted into a bracing anchor at a later stage.
Download the new standard symbol with the link above and place in templates_drawings in you common folder.

You have the option to do a clash detection and decide if bracing anchors should be added for clashing braces or not.

1664276936871-204.png

“Clash Detection Braces” allows you to do a separate clash detection for a selection of braces. This could be the case if you do adjustments to clashing braces and want to check if the adjustments are sufficient to avoid clashes.

Braces.gif

 

Tags:
Copyright 2022 StruSoft AB
IMPACT Documentation