Generating IFC solids with reinforcement options 'All', 'Protruding', and 'None'

Now it is possible to add reinforcement to the IFC solids.

When generating the IFC solids you will be asked a couple of questions, first if you want to generate CIMs.

Then you will be asked if you want to generate reinforcement.

You will have the following options, see picture below.

This is how the model will be in CAD

and this is how it will show in IFC viewer

Note, we’ve added a new Reinforcement default setting called “SHOW_AREA_MESH_IN_IFC_SOLID” that controls if the reinforcement area meshes should be generated or not.