Electric ducts have been improved, previously we didn’t store the diameter of the duct or the depth location inside the element. It was “hard-coded” to a diameter of 20 mm and a depth location of 40 mm. The electric duct definition has been extended to include diameter but also properties that control the appearance so the duct can be drawn with a “thickness” (Draw as multi-line) and if a center line should be drawn and which linetype to use for the center line.

 The command for drawing and editing the electric duct has also been improved so that all properties of the duct can be set in a dialog.

Another improvement is that when drawing multiple ducts that connects/intersects with each other they are trimmed against each other when generated, see the GIF:s below.

Note that "multi-line" ducts aren't drawn for walls, beams, and columns on the floor plan.