Improvements to panel ties so it also supports wall ties
Draw panel ties have been changed so it also supports wall ties on solid walls.
The new dialog box has the following functions:
Placement
A - The distance from the bottom of the element to the bottom row of Panel/Wall ties
B - The distance from the top of the element to the top row of Panel/Wall ties
C - The CC distance of the Panel/Wall ties that is placed between the bottom and top row
D - The distance from the left of the element to the left row of Panel/Wall ties
E - The distance from the right of the element to the right row of Panel/Wall ties
F - The CC distance of the Panel/Wall ties that is placed between the left and right row
Double wall ties - Adds Wall ties at the half distance
Double wall ties around openings - Adds Wall ties at the half distance around openings
Offset opening - If there are wall ties within this offset then will there be added “Extra wall ties” between the “existing” wall ties.
Bricklayers - Will be implemented at a later point
Bricklayer height - Will be implemented at a later point
Cast-in Material
CIM Group - Filters the selectable CIMs under Name
Name - The CIM that is getting inserted
Treatment - The Treatment of the selected CIM
Dimension - Sets the dimension for the CIMs on the shop drawing
Annotation - Sets the annotation text on the dimension line
Spacing - It's possible to set a Fixed or max distance between the Panel/Wall ties.
Side - Sets the placement of the Panel/Wall ties
Distance from Front/Back - Sets a distance to the chosen side
Example
Before adding the wall ties
Adding the wall ties with the settings above