New variables that control the height on the MEP key picture

Last modified by Thomas Gitsas on 2018/12/05 14:01

There are 3 new variables added on the Standard Admin that control the element height, ceiling and floor level on an MEP key picture (see example).

VariableTypeValue
MEPPREVIEWDEFAULTELEMENTHEIGHT (default 3000)0Add the desired value, i.e. 4000
MEPPREVIEWDEFAULTCEILINGLEVEL (default 2800)0Add the desired value, i.e. 5000
MEPPREVIEWDEFAULTFLOORLEVEL (default 200)0Add the desired value, i.e. 1000

The following picture is according to the example values used on the table

1543995928586-771.png

 

Tags:
Created by Thomas Gitsas on 2018/12/04 15:38
Copyright 2018 StruSoft AB
Impact Documentation