Possibility to get the lift points for FormSlab in the cast in material specification by setting the variable "DWGMTOLIFTSFORMSLAB" to 1 in Standard Admin.
Possibility to get the lift points for FormSlab in the cast in material specification by setting the variable "DWGMTOLIFTSFORMSLAB" to 1 in Standard Admin.
This only works for new drawings. This will not even work if an existing drawing is regenerated. A new formslab needs to be drawn and a drawing generated for it.
In this example, FS53 was drawn and a drawing was generated before the variable was added. After that, FS54 was drawn and a drawing generated for it.
The difference between the examples is that the lifts are set to 1 in "Pieces". If there is an already drawn drawing and the lifts need to be in the CIM list, the lifts can be edited, changed to 1 in "Pieces" and the drawing updated.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
DWGMTOLIFTSFORMSLAB | 0 | 0 |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
DWGMTOLIFTSFORMSLAB | 0 | 1 |