Possible to divide reinforcement groups into multiple rows

Last modified by Dennis Knudsen on 2018/12/10 12:09

It is now possible to divide reinforcement group view (30 and 31) into multiple rows with the two new variables called "Group_View_Max_Rows" and "Group_View_Gap_Columns". These variables should be placed under "Reinforcement - Defaults" ind Standard Admin.

"Group_View_Max_Rows" sets how many reinforcement groups there is allowed in a row and "Group_View_Gap_Columns" sets the distance between the rows. 

Group_View_Max_Rows0Add the desired value, i.e. 4
Group_View_Gap_Columns (default 500)0Add the desired value, i.e. 500


Here is the result in AutoCAD.


IMPACT will divide the reinforcement groups into evenly sized columns, for instance if there's 9 groups and max rows the number of rows are set to 4 we create 3 columns with 3 groups in each instead of create 3 columns with 4 + 4 + 1 groups like the picture below:



Created by Dennis Knudsen on 2018/12/10 12:03
Copyright 2018 StruSoft AB
Impact Documentation