Possible to set the length of the straight bars in the reinforcement beam/column.
The following options are added when drawing a reinforcement beam/column:
Specify length of straight bars [Element/User] <Element>: User
Specify anchorage length at first point <0>:
Specify anchorage length at second point <0>:
Before the length of the straight bars automatically took the width of the element. This can still be chosen if it is needed.
Figure 1: Element is chosen "Specify length of straight bars [Element/User] <Element>: Element"
Figure 2: User is chosen "Specify length of straight bars [Element/User] <Element>: User". Specify anchorage length at first point <100>:100. This is shown in figure 4.
Figure 3: Specify anchorage length at second point <0>:0
Figure 4:100 anchorage length at first point and 0 at second. The bars are also the length that was chosen by the user.