New

New: A new setting to remove the volume of reinforcement and girders in the Unitechnik export for FormSlab and DoubleWall. (Case 110864)

Fix

Fix: where the 3D drawing (IFC solid) was not showing endcaps as intended. (Case 115445)
Fix: where some mesh definition had spacing set to 0 and where causing AutoCAD to crash. (Case 115490)
Fix: where reinforcement bars did not change to the correct layer when added to a reinforcement group. (Case 117104)
Fix: Where mirror linked elements offset the CIMs in the mirrored element and did not match the origin element. (Case 116570)
Fix: where AutoCAD would crash if the production line for double walls and form slabs were set to none. (Case 115484)
Fix: where annotation for beam recess got overwritten on shop drawings. (Case 116682)
Fix: Thickness at lifts doesn't get updated correct. (Case 117351)
Fix: Stretch in Prestressed solid slab move the insertion point for the slab. (Case 112546)
Fix: Straight bars are no longer removed when formslab shop drawings are regenerated from the plan drawing. (Case 114320)
Fix: Special case where the text for reinforcement in a beam section wasn't correct. (Case 117325)
Fix: Special case where the export of holes as mountpart to unitechnik didn't work correct for Double Walls. (Case 116728)
Fix: Special case where other endcaps were not working as intended. (Case 113078)
Fix: Special case where clash detection reset the color to original color for frozen rc group. (Case 116931)
Fix: Special case where a corbel with a negative angle wasn't drawn. (Case 115469)
Fix: Special case when removing all levels in "Levels-Building" and then adding one of them again in the same sequence ends with an error message. (Case 117349)
Fix: Mirroring Bays in Beams and Blocks was not working properly. (Case 92717)
Fix: Magnify connections now works properly with UCS. (Case 112439)
Fix: Incorrect Elevation after split Double Wall. (Case 112664)
Fix: Import dynamic cast in material and renaming makes it possible to overwrite existing cast in materials. (Case 112428)
Fix: Element Label updates with Set mass. (Case 115498)
Fix: Corbel color not changing back after save & exit in elevation. (Case 115471)
Fix: CIM and Recess disappear when the height of a wall is changed. (Case 115494)
Fix: Center of gravity symbol for slabs where drawn on the wrong layer in shop drawing. (Case 116593)