Set "cut reinforcement mesh" at the recess window to "YES" as default

Last modified by Thomas Gitsas on 2018/08/29 10:47

Set value to 1 to set "cut reinforcement mesh" as default at the recess properties. Set value to 0 if that is not a relevant setting. Variable is set in Standard Admin tool.

VariableTypeValue
DWGRECESSCUTMESH01

The following picture illustrates what happens if we set value to 1.

1535532371864-147.png

Tags:
Created by Thomas Gitsas on 2018/08/29 09:15
Copyright 2018 StruSoft AB
Impact Documentation