Setting element colors on floor plan and elevation based on the definition.

Last modified by Adam Carlson on 2022/05/05 15:53

Priority for coloring elements (not IFC solids):

1. If the element is starred (* ) and "UNSAVEDELEMENTCOLORRGB" is set then the unsaved color is applied.

2. If the element isn't approved (mass, size):

  1. If the element is drawn as a wireframe then the rejected layer of the standard is applied.
  2. If the element is drawn as a solid and both "Realistic color" and "SOLIDCOLORBYMATERIAL" settings are on then "SOLIDCOLORBYMATERIAL" is applied to the element.
  3. The rejected layer of the standard is applied.

3. If the element is drawn as solid the setting "SOLIDCOLORBYDEFINITION" has higher priority than "SOLIDCOLORBYMATERIAL".

4. If the element is drawn as a wireframe the color setting of the definition is applied.

5. If the element is drawn as a wireframe the color setting of the layer of the standard is applied.

1.png

2.png

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki