Two lifts on the column top

Last modified by Thomas Gitsas on 2018/08/30 14:37

It is now possible to use 2 lifter on top of a column. In order to achieve that in the column definition select Column Top as method, Two Lift points as the number and then add Type, Name and Max mass as shown in the following picture.


Remember to delete all the lifters from One Lift Point as illustrated on the following picture.


The result can be seen in the following figure.



Created by Thomas Gitsas on 2018/08/30 14:07
Copyright 2018 StruSoft AB
Impact Documentation