Version 17.0.003 Q4/2022

Last modified by Adam Carlson on 2022/12/12 08:34

New

New: Show the hatch for clean cores yes/no on floor plan. Added variable "SHOWNONCLEANEDCORESINMODEL", default 0 (Off). (Case 102617)

New: 3D Jig for draw DoubleWall. (Case 8624)

New: Add a new measure for the maximum height of sloped beams in the main view. (Case 122217)

New: Wall Outline Command, has the option to change the orientation of solid walls. (Case 122652)

New: Draw MEP keys direct in the element. (Case 122393)

New: Modeling of stairs as linked element. (Case 122231)

New: Insert linked element now uses a jig, displaying the element as you pick insertion point and rotation interactively. (Case 121919)

New: Support for BricsCAD V23. (Case 121749)

New: Draw recess command face based for all element types. (Case 121064)

New: Symbol for the None points in MEP-Keys to show in the dialog. (Case 110659)

New: Function to line up the endcaps used in a project with reference to the elements. (Case 89751)

Fix

Fix: "Created Date" and "Changed Date" for components are now converted to the correct local time. (Case 94343)

Fix: Menu for Beams and Blocks module. (Case 123008)

Fix: Plan - Generate Braces - Add bracing anchor symbol - Did not add a symbol. (Case 122778)

Fix: The diagonal lines in recesses were not always shown on the elevation drawing. (Case 123406)

Fix: Special case where the thickenings for lift in left/right side of the wall didn't have the correct dimensions. (Case 123415)

Fix: Special case where the slab geometry was drawn incorrectly. (Case 123426)

Fix: Set 'Ready for Production' on an elevation drawing didn't work. (Case 123481)

Fix: Setting the top lifts to none for slabs makes the side lifts also disappear. (Case 123599)

Fix: Special case when editing recess in BricsCAD didn't work. (Case 123655)

Change

Change: The component dialog box size has been made bigger. (Case 121652)

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki