New

New: Add an extra vertical section for walls if only doors are in the element.  New variable "VERTSECTIONWALLNODOOR", default on (1). (Case 124896)

New: Add a new setting that automates the producibility control for all Element types. (Case 124808)

New: Brace angle and Bracing length added to the "Bracing Block". (Case 124806)

New: Centre of gravity for beams and columns in Shop drawing. (Case 111815)

New: Colors on Cast in materials and the dimension line on the shop drawing for cast in materials depending on CIM group. (Case 60847)

New: Create new pictures for Reinforcement Templates for Insulated Wall. (Case 125426)

New: Draw cast in material from draws new cast in material or symbols based on cast in materials that is already in elements. (Case 124897)

New: Elevation setting added to Generate Bracing. (Case 124805)

New: Hollowcores with the cut type "Symmetrical" is now dimensioned to the element edge and not the "Full width" of the form. (Case 126039)

New: Move lifts functionality added to Double Wall. (Case 124728)

New: MTO CIM not only redraws the dimensions, but it now also updates the drawing view 33. (Case 125880)

New: Multicopy components in model from one element to many with relation to another component or reference point. (Case 124875)

New: Setting in the Hollowcore definition to alternate positions of weep holes to avoid cracks. (Case 125307)

New: Stairs, possibility to set the height of steps and new implementation for the height of first- and last step. (Case 125843)

New: Stirrups with endhooks are now displayed with complete information in the bending schedule. (Case 125554)

New: Support for AutoCAD 2024. (Case 125741)

Fix

Fix: "Add All" Does not add all the MEP-Keys. (Case 126292)

Fix: Don't allow copying layouts from a template drawing to itself. (Case 125402)

Fix: Draw mesh don't add location text for up in mould (slab) and far face (wall). (Case 126299)

Fix: Line-Up Endcap pictures on "Draw Element" and "MTO" went missing. (Case 124936)

Fix: Possible to make shop drawings with a locked drawing template. (Case 124943)

Fix: Special case where an extra line was drawn and a filling was sticking out in a sandwich wall. (Case 125757)

Fix: Special case where editing a bar mesh didn't work properly. (Case 125574)

Fix: Special case where endcaps not joining correctly in the corners. (Case 125489)

Fix: Special case where the elevation symbols and dimension lines are moved closer to the element in wall sections. (Case 125881)

Fix: Special case where the endcap labels weren't aligned for the wall sections. (Case 125541)

Fix: The radius for recess arc segments shouldn't be dimensioned if the dimension type is set to "None". (Case 125600)

Fix: Show ready for production restored on close. (Case 125369)