Draw Form Slab...
The command for starts with a dialog with two tabs, General & Bended bars. Both these tabs will be presented below. An example will be shown with a form slab with reinforcement sticking out of it on both sides.
General
These are the values that are used for this example. The important thing is that there is a Reinforcement primary direction defined as this will be bent.
Bended bars
The bended primary reinforcement can be defined in the definition and separately for each element.
Note: For this to work the shape code JJ must be present in the drawing. A drawing containing this shape code can be found below:
How to import the shape code to your file can be seen below:
Note: If you wish to have another name for the shape code than JJ then this must be defined in Standard Admin -> Settings -> Common -> Reinforcements -> Definitions.
JJ should be in the Id and the custom name in the Text box.
The end results will look like this;
In AutoCAD:
In AviCAD (Unitechnik viewer):