Location

Last modified by superadmin on 2021/05/04 17:11

To get the information about the location of the element, one can use IMPACT Locate. The tool works the same for Walls, Slabs, Hollow Cores, Linked, Beams, and Columns, but in the example below, a slab is used. 

Start by launching the command Location Wall, Location Slab, Location Hollow Core, Location Linked, Location Beam, Location Column. 

location_cmd.png

Figure 1: Location Wall, Location Slab, Location Hollow Core, Location Linked, Location Beam, Location Column

Select the element one wants to know the location for. 

location slab.gif

Figure 2: Location Slab

In the Element properties dialog, there is some information that can be collected. 

location slab_2.png

Figure 3: Element properties

  1. Building - which building the element is located in
  2. Floor - which floor the element is located on
  3. Phase - which phase the element is included in
  4. Drawing elevation
  5. Element elevation
  6. Edit elevation - here one can edit the elevation of the element. Either Relative to the element or Absolute to the drawing elevation

Contents