When building with precast elements, the buildings are often symmetric. Then mirroring elements will save a lot of time. This is, of course, possible in IMPACT.  

All mirror element commands works exactly the same. Below, one can an example where Mirror Wall and Mirror Hollow Core is used. 

Start with launching the Mirror command.

Note: AutoCAD command Mirror is not working for mirroring IMPACT elements, because information to the database will get lost. 

mirror_cmd.png

Figure 1: Mirror element commands. Also available for Form Slab and Double Wall

mirror_wall.gif

Figure 2: Mirror Walls

mirror_hc.gif

Figure 3: Mirror Hollow Core

Contents

Tags:
Created by Linus Karlsson on 2018/11/15 16:45
Copyright 2018 StruSoft AB
Impact Documentation