Recommended BricsCAD settings

Version 13.1 by Linus Karlsson on 2019/02/05 10:11

Each computer running IMPACT for BricsCAD needs to have some options in BricsCAD configured in order for commands and functions to work properly. This article will cover how to configure BricsCAD for use with IMPACT.

Configure settings

The settings will be configured from the command prompt. Start the BricsCAD version that you use with IMPACT. 

Type GRIPBLOCK in the command prompt and set it to 0

GB1.png

Figure 1: GRIPBLOCK

GB2.png

Figure 2: Set to 0

Type ROLLOVERTIPS in the command prompt and set it to 1

RT1.png

Figure 3: ROLLOVERTIPS

TR2.png

Figure 4: Set to 1

Type LAYOUTREGENCTL​​​​​​ in the command prompt and set it to 2

LR1.png

Figure 5: LAYOUTREGENCTL

LR2.png

Figure 6: Set to 2

Type CREATEVIEWPORTS​​​​​​ in the command prompt and set it to 1

CV1.png

Figure 7: CREATEVIEWPORTS

CV2.png

Figure 8: Set to 1

Type PROXYGRAPHICS​​​​​​ in the command prompt and set it to 0

PG1.png

Figure 9: PROXYGRAPHICS

PG2.png

Figure 10: Set to 0

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki