Solid Slabs, Prestressed Slabs, Hollow Cores, and Double T:s are different types of slabs. Below, one can find a list of all the commands regarding slabs. Please note that some of the commands work exactly the same for all types of slabs.

Specific commands for slabs are located under both the Plan and Element tab.

The picture below shows all the commands under the Plan tab that will be presented.

The picture below shows all the commands under the Element tab that will be presented.

Commands

• Draw Slab

• Draw Prestressed Slab

• Draw Hollow Core

• Draw, Edit and Split Horizontal Hollow Core Wall

• Draw Vertical Hollow Core Wall

  Draw Connection

  Draw Sections

• Edit 

• Save 

• Save As

• Slab Definitions

• Section Definitions

• Hollow Core Definitions

• Draw Weep Holes

  Show Weep Holes

• New

• Insert

• Replace

• Update

• Mirror

• Location

• Find Component...

• Regroup

• Trim, Extend slabs

• Show Endcap Details

• Insert Lift

• Draw Connection Recess/Edge

• Draw Hanger Detail

• Hanger Details

• Hangers

• Draw Core Filling

• Edit Core Filling

• Show Cores

  Show Endcap Labels

• Show Strands

• Split Slab

  Generate Bar Mesh, Batch

Shop Drawing Commands

• Possibility to add hatch to core fillings on shop drawings

• Open Shop Drawing

  View Shop Drawings...

• Generate Shop Drawings...

• Solid/Prestressed slabs have new blocks for mould side symbol in the sections

• Section outside of the element on shop drawing implemented for slabs.

Other

• How to edit slab geometry with vertex points

• Copy from "By User" to a strandpattern for Prestress slabs.

Project Properties

Project Properties - Drawings - Slabs and Prestressed Slabs