Create Double Wall Shop Drawing
Introduction
In IMPACT for Revit Q1/2021 Release, it is now possible to create Shop Drawing for the Double Wall elements.
Figure 1 - Create Shop drawing command for Double Walls in IMPACT for Revit
When creating Double Wall Shop Drawing, the user have the possibility to change the opening labels from IMPACT Standard Admin. To do so, there are three variables that can be changed: "DWGTEXTDWHOLELABELDOOR", "DWGTEXTDWHOLELABELWINDOW" and "DWGTEXTDWHOLEMARKPREFIX".
Figure 2 - Opening variables in IMPACT Standard Admin
There is also a possibility to control the visibility of the Lattice girders in the Double Wall Panel 2. Sometimes, the user needs to see if the Lattice girders collide with other Cast in materials inserted in the Double wall. The Panel 2 view of Lattice girders can be controlled from IMPACT Standard Admin via variable "PLOTGIRDERINPANEL2DOUBLEWALL".
Figure 3 - Variable to control Lattice Girder view in Panel 2 in Double Wall Shop Drawing
When creating Double Wall Shop Drawing, the lifts will always be shown in Panel 1.
If the user wants to see the Lifts also in Panel 2, this can be done with the variable "SHOWLIFTINPANEL2DOUBLEWALL" from IMPACT for Standard Admin.
If the variable "SHOWLIFTINPANEL2DOUBLEWALL" is set to 0, then the lifts will be visible only in Panel 1.
If the variable "SHOWLIFTINPANEL2DOUBLEWALL" is set to 1, then the lifts will be visible in Panel 1 and Panel 2.
Figure 4 - Variable to control Lift visibility in Panel 2 in Double Wall Shop Drawing
In order to avoid having a long list of the Reinforcement schedule when creating Double Walls Shop Drawings, we have split the schedule into 2 parts - one part for Panel 1 and part for Panel 2.
Figure 5 - Reinforcement schedule in Double Wall Shop Drawing
Contents