Element mark setting for Double Wall

Last modified by superadmin on 2021/08/30 14:51

Always use new element mark for Double Wall

IMPACT users would usually like to have a new element mark for each Double wall element. Therefore you will find a setting in IMPACT Revit that can be activated on a project level. 

Go to IMPACT tab - > Settings -> Generel.

Activate the setting called ´´Always use new element mark (Only for double wall)´´

All Double walls elements in the project will be saved with a new element mark. 


Figure 1. Settings for Double wall element mark 

Copyright 2022 StruSoft AB
IMPACT Documentation