Switch Bracing Panel

Last modified by superadmin on 2021/08/30 14:48

By default, bracings are attached to panel 1. Panel 1 is also the panel, where the element mark is placed in Double Walls. Switch Bracing Panel command will switch the placing of the bracing from Panel 1 to Panel 2.

Find the command by going to IMPACT tab-> Double Wall falling menu -> Switch Bracing panel. Then simply select the wall and the bracing will switch panels. See a demonstration of the functionality in the video below. 

switchbp.gif

Figure 1.  Switch Bracing panel command.   

 

Copyright 2024 StruSoft AB
IMPACT Wiki