Show last authors
1 (% class="row" %)
2 (((
3 (% class="col-xs-12 col-sm-8" %)
4 (((
5 = What is Element Designation? =
6
7 IMPACT Element Designation can be previewed in the IMPACT shop drawing. 
8
9 IMPACT Element Designation is a value that is formed by the following formula:
10
11 //IMPACT Designation prefix for current element +  the element width in cm + “/” +  the element height in cm.//
12
13 For example WP 20/ 240
14
15 IMPACT Designation prefix is set either in the element family (Beams, Columns & Hollow cores) or in the element definition (Walls, Slabs & Form slabs). See IMPACT Designation prefix in [[IMPACT Element parameters>>doc:IMPACT Applications.IMPACT for Revit.IMPACT Element paramaters.WebHome]] article. [[image:4.jpg]]
16
17 //Figure 1 - Element Designation in the shop drawing head.  //
18
19
20 = Element Designation in the shop drawing =
21
22 In order to add the IMPACT Element Designation parameter, open the title block family in the shop drawing template.
23
24 Afterward, edit a label and assign the IMPACT Element Designation parameter to the label.
25
26 Next time a shop drawing is generated, the IMPACT Element Designation will be displayed in the drawing head as shown in the start of the article above.
27
28 [[image:3.jpg]]
29
30 //Figure 2 - IMPACT Element Designation label in the shop drawing head family. //
31 )))
32
33 (% class="col-xs-12 col-sm-4" %)
34 (((
35 (% class="box" %)
36 (((
37 Contents
38
39 {{toc/}}
40 )))
41 )))
42 )))
Copyright 2018 StruSoft AB
IMPACT Documentation