Endcap with Slope

Some endcaps for slabs need to be sloped, e.g. endcaps for balconies. It is now possible to create such endcaps in IMPACT for Revit. 


Figure 1: A sloped endcap is applied on a solid slab. 

Note: To make this work, the end of the sloping side must be horizontal. It's enough if there is a 2 mm horizontal line in the end. 


Figure 2: The sloped side needs to end with a horizontal line. 

Endcap thickness

Slab endcap creation is now smarter. You will find a new tab in the endcap settings window called "Thickness", which automatically detects endcap thickness. Before this change, it was only possible to remove material from the element. Now it is also possible to add.


Figure 3: New section "Thickness" in the endcap settings window.


Figure 4: How endcaps worked before and how they will work after Impact 16 Q3 Release.

Copyright 2020 StruSoft AB
IMPACT Documentation