Control measure setting
Last modified by superadmin on 2021/08/30 16:26
Introduction
When producing Shop drawings in IMPACT for Revit, sometimes the user doesn't need to show the last dimension for the CIM.
To provide better integration with the IMPACT database, the Control measure settings have been removed from IMPACT for Revit Project settings. Now, the settings can be found in Project Properties under Drawings tab.
The Control measure settings are applicable to the following elements: Beams, Columns, Walls, Slabs, Prestressed Slabs and Hollow core.
Figure 1 - Control measure setting for Beams from Project properties in IMPACT Project Manager
Figure 2 - Beam Shop drawing generated with max control measure 1500mm
Contents