Mould symbol for walls and slabs

Last modified by Linus Karlsson on 2021/05/28 11:09

The setting for "Mould Up/Mould Down Symbol" can be configured for horizontal and vertical sections in the shop drawing templates. This is implemented for wall and slab element types. 

Note: For this functionality to work, one need to add the "Mould Down Symbol" and "Mould Up Symbol" families to the annotations folder in the standard. The families can be downloaded here

mould.png

Figure 1: Setting in shop drawing templates. 

The symbols can be added for either up in mould, down in mould, or both. 

hu.png

Figure 2: Mould up symbol.

hn.png

Figure 3: Mould down symbol.

hb_.png

Figure 4: Both symbols. 

The symbols can be modified by editing the families. 

 

Contents

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki