Skip to Content

It is now possible to get information about if the Unitechnik export is possible or not

Last modified by Dennis Knudsen on 2026/03/06 13:27

A new dialog box has been introduced for the "To Unitechnik - Welding Machine" export in the cast calendar. This dialog provides users with information on whether a Unitechnik export can be generated.

1772798324923-670.png

Figure 1: Unitechnik export dialog box.

The dialog is divided into two sections - Exportable and Not Exportable - each presented as a grid containing the following columns.

  • Project - The name of the project to which the element id is modelled in.
  • Project Title - The title of the project to which the element id is modelled in.
  • Element Mark- The element mark of the element.
  • Element Id- The element Id of the element.
  • Producibility Check- Shows the status of the producibility check for the element.
  • Ready for Production- Shows if the element is ready for production
  • Unitechnik - Shows if a unitechik export has already been made for the element through the cast.

Only elements that are placed under Exportable can be exported to unitechnik.

The following reasons place the element under Not Exportable.

  • Producibility Check- If the check is Not Checked or failed.
  • Ready for Production- If the element is Not ready to be produced.

It's possible to see directly in the cast grid if the elements have been exported to unitechnik or not. 

1772799385933-362.png

Figure 2: Unitechnik column in the cast grid

The Unitechnik export status can be used as the rectangle color in the cast calendar. This is configured in the calendar settings.

1772799466895-952.png

Figure 3: Calendar settings 

The status of the unitechnik export can be manually set in the right-click menu, allowing the user to easily change the status.

1772799211139-514.png

Figure 4: Set status in the right-click menu

A new project property has been added. This setting determines whether the Unitechnik export from the cast calendar should be based on an existing file or whether a new Unitechnik file should be generated from the database values. The setting is located in the project properties to ensure a smooth transition to Unitechnik export based on database data.

1772800140030-509.png

Figure 5: Project Property setting