Model edges can be turned on or off in Project Manager. This setting is found in the ribbon under the section view (figure 1). Choosing to not display edges will give the model a smoother feel to it and also increase the performance when working, most noticeable when rotating the model or zooming in or out. 

Figure 3: Edges in the view tab in the ribbon


Model with edges turned off. 


Figure 2: Model displayed without edges

Model with edges turned on.


Figure 3: Model displayed with edges

Created by Niklas Palmgren on 2018/03/08 16:31
Copyright 2018 StruSoft AB
IMPACT Documentation