Changes for page Bars

Last modified by Adam Carlson on 2020/01/20 16:03

From version < 34.1 >
edited by Adam Carlson
on 2019/03/06 10:32
To version < 35.1 >
edited by Adam Carlson
on 2019/05/08 14:39
< >
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -10,7 +10,7 @@
10 10  
11 11  When you draw a bar and uses the commando draw bar, you can change all settings in the dialog box. Therefore you do not need to see what is written in the dialog for the settings before you use the commando.
12 12  
13 -=== Edit Bars ===
13 +=== Edit Bars... ===
14 14  
15 15  [[image:Edit Bars picture 1.png]]
16 16  
... ... @@ -52,16 +52,16 @@
52 52  (% dir="ltr" %)
53 53  //Figure 4: Bar's rotation in IMPACT Reinforcement//
54 54  
55 -(% dir="ltr" %)
56 -=== Description of the different tabs ===
55 +(% class="wikigeneratedid" dir="ltr" %)
56 +=== Draw Bar... ===
57 57  
58 58  (% class="wikigeneratedid" id="H" %)
59 -A brief overview of what the different tabs do.
59 +A brief overview of what the different tabs do will follow.
60 60  
61 61  (% dir="ltr" %)
62 62  ==== General ====
63 63  
64 -Under this tab you specify all technical data such as steel quality, diameter, bending type, etc. Under //Endhook 1// and// Endhook 2 //you specify how the reinforcement bar should be bent at the ends.
64 +Under this tab, you specify all technical data such as steel quality, diameter, bending type, etc. Under //Endhook 1// and// Endhook 2 //you specify how the reinforcement bar should be bent at the ends.
65 65  
66 66  (% dir="ltr" %)
67 67  Below this tab, you can see the dimensions of the bar and you can also edit the dimensions. There is also a separate command button //Measure Edit ...// to the right. We will later in this article go through how to edit the measurements for a bar with //Measure Edit ...//
... ... @@ -69,11 +69,11 @@
69 69  (% dir="ltr" %)
70 70  //[[image:generalszu.png]]//
71 71  
72 -(% class="wikigeneratedid" dir="ltr" %)
72 +(% dir="ltr" %)
73 73  ===== //Measure Edit ... & Barmark// =====
74 74  
75 75  (% dir="ltr" %)
76 -In the GIF below, the measurements are changed under the general tab. If you click on the arrow to the right you can pick on the drawing how long one side should be. You will also be able to choose the correction and round. The same can be configured from the Measure Edit menu.
76 +In the GIF below, the measurements are changed under the general tab. If you click on the arrow to the right you can pick on the drawing how long one side should be. You will also be able to choose the correction and round. The same can be configured from the Measure Edit menu.
77 77  A Barmark is a saved bar which you can use later with saved measurements and changes. Barmarks can be chosen by clicking the three dots to the right.
78 78  
79 79  (% data-placeholder="Translation" dir="ltr" id="tw-target-text" %)
Copyright 2018 StruSoft AB
Impact Documentation