Reinforcement Configuration Tool

Last modified by Kristofer Hellman on 2020/03/19 09:47

 

IMPACT Reinforcement Configuration Tool is used to configure which settings to use with the installation of IMPACT Reinforcement. 
Note: Before you can change anything, AutoCAD or BricsCAD needs to be closed down.

An example of when to use the tool is when the user wishes to change the layers of the reinforcement in some drawings. The Standard can then be changed from Standard to Precast.

1518007010204-250.png
Figure 1, IMPACT Reinforcement Configuration Tool setup

Contents

Copyright 2018 StruSoft AB
Impact Documentation