Show last authors
1 (% class="row" %)
2 (((
3 (% class="col-xs-12 col-sm-8" %)
4 (((
5 = Convert to reinforcement group =
6
7 It's possible to convert single bars and stirrups into reinforcement groups by using the command //Convert to reinforcement group//.
8
9 [[image:Convert Reinforcement 1.png]]
10
11 //Figure 1: Command Convert Reinforcemnet Group in AutoCAD//
12
13 Click the command and select the bar and stirrups that should be converted into a Reinforcement group.
14
15 [[image:Convert Reinforcement 2.png]]
16
17 //Figure 2: Converting the bars and stirrups into a reinforcement group//
18
19
20 Finish with enter and thereafter do an MTO. The newly converted reinforcement group will get a number and a lineup.
21
22 [[image:Convert Reinforcement 3.png]]//Figure 3: Bars and stirrups converted into a reinforcement group //
23
24
25 [[image:Convert reinforcement group.gif]]
26
27 //Gif 1: Conversion of bars and stirrup//
28 )))
29 )))
Copyright 2018 StruSoft AB
Impact Documentation