Designation styles...

Last modified by Adam Carlson on 2019/02/07 16:16

Introduction

When working with reinforcement, all the text belongs to a certain text-template. This text-template is called Designation style. For all reinforcement that is created, one must decide which Designation style should be used. One can use the standard settings or create your own. 

A designation style is a pre-defined style that makes the style and content of the text. This can be compared to using and configuring measurement-styles. 

All changes one makes are bound to the drawing file that is currently open. If the Designation style is desired in another drawing or vice versa, then it can be imported or exported. 

If the designation style should be applied to all new drawings on the local or common level the designation style should be created on the bl.dwg. 

Designation styles....png

Figure 1: Designation styles...

Creating a new Designation style

The advantage with copying an existing is that you get a lot of pre-defined settings. However, sometimes you need to create a new one. 

In this example, we will create a new Designation style that will be used when drawing reinforcement in a section. The new Designation style should be called SectionB and have the following appearance: 10 Ø12 s150-B5 (Number of bars, diameter, ctc-distance, bar number).

Under the reinforcement tab, click on Designation styles... and click new. Type SectionB -> OK -> edit.

SectionB1.png

Figure 2: Creating a new Designation style

Adding a description under the general tab.

SectionB1 description.png

Figure 3: General tab

Choose the textstyle ISO and the textheight 2.5 (mm) under the style tab.

SectionB1 style.png

Figure 4: Style tab

Moving to the bar tab, here you will choose how the text to the bar should appear on a drawing. What we will do is following, according to our example 

10 Ø12 s150-B5 (Number of bars, diameter, ctc-distance, bar number). This will be written in the Designation style as below:

First the amount, space, diameter symbol, diameter, space, one s, ctc-distance, a punctuation mark, shape code and lastly a bar number.

You must also specify a Criteria value whether the text should appear or not. For example, the shape code should not be written when it is a straight bar (shapecode A for the Swedish standard). 

SectionB1 bar.png

Figure 5: Bar tab

When the values are picked and typed (the ones marked are typed, the rest picked), It should look like below. 

Description of the logical: 

  • != Not equal to 
  • < Less than
  • <= Less than or equal to
  • = Equal
  • > Greater
  • >= Greater than or equal to
  • False. e.g. the criteria "material take off" is OFF (It will not do an MTO)
  • True. e.g. the criteria "material take off" is ON (It will do an MTO)

SectionB1 bar filled.png

Figure 5: Bar tab filled

The Designation style is set to SectionB when the following bars are drawn. 

Section B1 text sec.png

Figure 6: Text tab designation style chosen to SectionB

Below, reinforcement bars are drawn with both the shape code 00 (Straight bar, the one which shall not be displayed) and B.

Section B1 shape code 00.png

Figure 7: Draw Bar

Import designation styles from another file

You can import a designation style from another file without getting the things drawn in it. Let us assume that you are in the drawing ga-0101 and need a designation style that was created in Ga-0102 called Importdesstyle. The procedure is following:

You should have the drawing ga-0101 open -> Designation styles... -> Export/Import -> Browse... -> (find the drawing Ga-0102) open it (now all designation styles in this drawing shows.) -> mark Importdesstyle and press Import -> OK. Now you also have the designation style in the drawing ga-0101

Section B1 import desstyle.gif

 

Tags:
Created by Adam Carlson on 2019/02/04 11:58
Copyright 2018 StruSoft AB
Impact Documentation