Bill of material

Last modified by Adam Carlson on 2021/10/12 15:35

Introduction

This report is mainly for the environmental aspect, listing materials such as Cast in materials, concrete, reinforcement, and insulation.

Design report that can be printed from the environmental tab.

Report Setup

General report setup. All the fields have to be filled as it prints a sum row at the end of each page.

1b.png

Page max X and Page max Y defined the maximum size of the report page.
The x-axis is the columns A, B, C, and etc. and the Y-axis is the rows 1, 2, 3, and etc.

Continuous Header is defined in which row the header and footer start, and in this case, it starts from row 0.

There is no continuous in this report.
There is no summary in this report.

As you can see, almost all values are 0 and that is because this is not a traditional report to print but more of extraction of data from the database.

Header setup: 
Here is how the header is set up for this report.

2b.png

As you can see we have those x and y values for each field, so the program knows where to put the specific information into the report.

Here are the fields that can be added to the Header and footer:

FieldsDescription
CIM_TABLE 
CONCRETE_TABLE 
INSULATION_TABLE 
PROJECT 
PROJECT_SUMMARY 
PROJECT_TRIMED 
REINFORCEMENT_TABLE 
REPORT_NAME 
REPORT_PAGE_NUMBER 
REPORT_PRINT_DATE 
REPORT_TITLE 
USER_DIVISION_CITY 
USER_DIVISION_COUNTRY 
USER_DIVISION_DESCRIPTION 
USER_DIVISION_FAX 
USER_DIVISION_NAME 
USER_DIVISION_PHONE 
USER_DIVISION_STREET 
USER_DIVISION_ZIPCODE 
USER_MOBILE 
USER_NAME 
USER_PHONE 
USER_SIGNATURE 
USER_TITLE 

Selection setup:
the standard setup for the selections.

Continuous setup:

There is no Continous in this report.

Print report

From Report Tool
To be able to print this report you have to have access to the environmental module.

1625737636058-552.png

Example

Here is an example of my first report

1625737780328-103.png

Download

You can download the report template here

Copyright 2024 StruSoft AB
IMPACT Wiki