Cast-In Material Specification

Last modified by Adam Carlson on 2023/12/06 12:58

Introduction

The report specifies the Cast-In Materials in the project. 

Design report that can be printed from Report Tool and from the Project manager.

Report Setup

General report setup. All the fields have to be filled as it prints a sum row at the end of each page.

1c.png

Page max X and Page max Y defined the maximum size of the report page.
The x-axis is the columns A, B, C, and etc. and the Y-axis is the rows 1, 2, 3, and etc.

Continuous Header is defined in which row the header and footer start, and in this case, it starts from row 0.

Continuous start row(in this case it is row 11) is where the main info starts and ends in the Continuous end row(in this case it is row 35)
And in row 36 we have the summary for each page

Header setup: 
Here is how the header is set up for this report.

2c.png

As you can see we have those x and y values for each field, so the program knows where to put the specific information into the report.

As mention above the Continuous header starts at row 0 to row 10 in the Y direction.

Here are the fields that can be added to the Header and footer:

FieldsDescription
BUILDING 
DIVISION 
FACTORY 
PHASE 
PROJECT 
PROJECT_SUMMARY 
PROJECT_TRIMED 
REPORT_NAME 
REPORT_PAGE_NUMBER 
REPORT_PRINT_DATE 
REPORT_REVISION 
REPORT_REVISION_DATE 
REPORT_TITLE 
SELECTION_PRODUCT 
USER_DIVISION_CITY 
USER_DIVISION_COUNTRY 
USER_DIVISION_DESCRIPTION 
USER_DIVISION_FAX 
USER_DIVISION_NAME 
USER_DIVISION_PHONE 
USER_DIVISION_STREET 
USER_DIVISION_ZIPCODE 
USER_MOBILE 
USER_NAME 
USER_PHONE 
USER_SIGNATURE 
USER_TITLE 

Selection setup:
the standard setup for the selections.

Continuous setup:

Here in Continuous setup is where you set up all the information about holes in this case.

3c.png

As you can see, here you define only one row because this row will be the bases for this report, from row 11 to 40 like shown further up. 

The fields you can add to this section are listed below.

FieldsDescription
CIM 
CIM_EXTENTS_X1Added in Q4/2023
CIM_EXTENTS_X2Added in Q4/2023
CIM_EXTENTS_X3Added in Q4/2023
CIM_EXTENTS_Y1Added in Q4/2023
CIM_EXTENTS_Y2Added in Q4/2023
CIM_EXTENTS_Y3Added in Q4/2023
DESCRIPTION 
NUMBER_OF_PER_ELEMENT 
REFERENCE 
SUM 

Print report

From Report Tool
It is possible to make the normal selection on what to print, based on the information you want to get out of the report.

You also have the option to save your selection.

4c.png

When clicking on "Print" you will be prompt with the option to create the path for the report. Select yes and the report will be created and stored under the project folder.

createdocpath.png

If you add elements or change anything in the project and print the report again, the report will make a new file and store the difference in the new file, so that you can see what has been changed in the project.

From Project Manager

From the project manager, you actually have few options to print this report. First of all from the model view. Just select the elements, right-click and go to print and select Cast-In Material specification. 

1585317596946-554.png

You can do the same from Element Ids

1585317651370-492.png

Example

Here is an example of the report.

5c.png

Download

You can download the report template here