Introduction

This is a label for each element with info about this specific element. 

Report Setup

General report setup. All the fields have to be filled as it prints a sum row at the end of each page.

Page max X and Page max Y defined the maximum size of the report page.
The x-axis is the columns A, B, C, and etc. and the Y-axis is the rows 1, 2, 3, and etc.

Continuous Header is defined in which row the header and footer start, and in this case, it starts from row 0.

In this case, we have no Continuous so the header makes the label itself.

Header setup: 

Here is how the header is set up for this report.

As you can see we have those x and y values for each field, so the program knows where to put the specific information into the report.

As mention above the Continuous header starts at row 0 to row 11 in the Y direction.

Here are the fields that can be added to the Header and footer:

Print report

From Cast Planning
This report can be printed from The Project Manager as shown here and also been printed from the Resource manager.

You right-click on the table/bed and so go print and select the Element label.

Example

Download

You can download the report template here