Insulation
Introduction
The Insulation report contains information about the insulation planning.
Report Setup
General report setup.
Page max X and Page max Y defined the maximum size of the report page.
The X-axis is the columns A, B, C etc. The Y-axis is the rows 1, 2, 3 etc.
Continuous Header Row defines in which row the header and footer start, and in this case, it starts from row 19.
Continuous Start Row (in this case from row 20) is where the main information starts and Continuous End Row (in this case until row 100) is where the main information ends.
Header setup:
Here is how the header is set up for this report.
As you can see we have different X and Y values for each field. This is done so the program knows where to put the specific information into the report.
Here are the fields that can be added to the Header and Footer:
| Fields | Description |
| ELEMENT_ID | |
| ELEMENT_INSULATION PICTURE | The overview picture(s) for all the insulation pieces. If placed with different levels multiple pictures will be added- |
| ELEMENT_INSULATION_PICTURE_LANDSCAPE | New in Q3/2024 |
| ELEMENT_INSULATION_PICTURE_LANDSCAPE_LIST | New in Q2/2025 - is printed in celles that is under each other with 10 rows in between |
| ELEMENT_INSULATION_PICTURE_LIST | New in Q2/2025 - is printed in celles that is beside each other with 10 colums in between |
| ELEMENT_MARK | |
| PROJECT | |
| PROJECT_SUMMARY | |
| PROJECT_TRIMED | |
| REPORT_PAGE_NUMBER | |
| REPORT_PRINT_DATE | |
| REPORT_TITLE | |
| USER_DIVISION_CITY | |
| USER_DIVISION_COUTRY | |
| USER_DIVISION_DESCRIPTION | |
| USER_DIVISION_FAX | |
| USER_DIVISION_NAME | |
| USER_DIVISION_PHONE | |
| USER_DIVISION_STREET | |
| USER_DIVISION_ZIPCODE | |
| USER_MOBILE | |
| USER_NAME | |
| USER_PHONE | |
| USER_SIGNATURE | |
| USER_TITLE |
Continuous setup:
The Continuous setup is where you set up all the information, in this case, about the Insulation.
As you can see, here you define only one row because this row will be the basis for this report, from row 20 as shown further up.
The fields you can add to this section are listed below:
| Fields | Description |
| AMOUNT | The amount of the same insulation piece |
| AREA | |
| DIST_FROM_CONCRETE | |
| HEIGHT | |
| IMAGE | The small picture of the individual piece |
| MATERIAL | |
| NAME | The name on the piece |
| NUMBER | |
| REMARK | Added in Q1/2025 - 17.2 |
| THICKNESS | |
| VOLUME | |
| WIDTH |
Print report
From insulation planning module in Project Manager and Resource Manager
Example
Download