Introduction

This report includes information about the element id, element floor, element building, width, length, product etc.

Report Setup

General report setup. All the fields have to be filled as it prints a sum row at the end of each page.

Page max X and Page max Y defined the maximum size of the report page.
The x-axis is the columns A, B, C, and etc. and the Y-axis is the rows 1, 2, 3, and etc.

Continuous Header is defined in which row the header and footer start, and in this case, it starts from row 10.

Continuous start row (in this case it is row 11) is where the main info starts and ends in the Continuous end row.
There is no summary in this report.

Header setup: 
Here is how the header is set up for this report.

As you can see we have those x and y values for each field, so the program knows where to put the specific information into the report.

As mentioned above the Continuous header starts at row 10 to row 40 in the Y direction.

Here are the fields that can be added to the Header and footer:

Selection setup:
the standard setup for the selections.

Continuous setup:

The continuous setup can look like this.

As you can see, here you define only one row because this row will be the basis for this report, from row 11 like shown further up. 

The fields you can add to this section are listed below.

Print report

From Report Tool
This report is printed from the Report Tool.

Example

Here is an example of the report.

Download

You can download the report template here