Reinforcement Specification
Reinforcement used in the project is shown, displaying the total number of it per element mark.
If an element type contains more than 10 element marks, the content is divided across multiple pages.
Each page or document includes a maximum of 10 element marks, with subsequent marks continuing on the next page.
Report Setup
General report setup. All the fields have to be filled as it prints a sum row at the end of each page.
Figure 1: General report layout
Page max X and Page max Y define the maximum dimensions of the report page.
The X-axis corresponds to columns labeled A, B, C, etc., while the Y-axis represents rows numbered 1, 2, 3, etc.
Continuous Header Row specifies the starting row for both the header and footer. In this configuration, it begins at row 10.
Continuous Start Row, set to row 11, marks the beginning of the main content.
Continuous End Row, set to row 40, indicates where the main content concludes.
If the final field is completed, a summary will be generated at the end of each page.
Header setup:
Here is how the header is set up for this report.
Figure 2: Header and footer report setup
Assigning x and y values to each field facilitates the precise placement of designated information within the report.
As previously stated, the Continuous Header Row spans from row 0 to row 10 along the Y-axis.
The following fields are available for inclusion in the header and footer sections:
| Fields | Description |
| BUILDING | |
| DIVISION | |
| FACTORY | |
| PHASE | |
| PROJECT | |
| PROJECT_SUMMARY | |
| PROJECT_TRIMED | |
| REPORT_NAME | |
| REPORT_PAGE_NUMBER | |
| REPORT_PRINT_DATE | |
| REPORT_REVISION | |
| REPORT_REVISION_DATE | |
| REPORT_TITLE | |
| SELECTION_PRODUCT | |
| USER_DIVISION_CITY | |
| USER_DIVISION_COUNTRY | |
| USER_DIVISION_DESCRIPTION | |
| USER_DIVISION_FAX | |
| USER_DIVISION_NAME | |
| USER_DIVISION_PHONE | |
| USER_DIVISION_STREET | |
| USER_DIVISION_ZIPCODE | |
| USER_MOBILE | |
| USER_NAME | |
| USER_PHONE | |
| USER_SIGNATURE | |
| USER_TITLE |
Selection setup:
The standard setup for the selections.
Continuous setup:
All element-related configurations are managed within the Continuous setup section.
Figure 3: Continuous report setup
As previously demonstrated, a single row is defined within this section, serving as the foundation for the report and extending from row 11 to row 40.
The fields available for inclusion in this section are listed below.
| Fields | Description |
| CUTLENGTH | |
| CUTLENGTH_ROUNDED | |
| DIAMETER | |
| MASS | |
| MASS_MESH_PER_M2 | |
| MESH_TYPE | |
| NUMBER_OF_PER_ELEMENT | |
| QUALITY | |
| RC_AREA | |
| RC_NAME | |
| RC_WIDTH | |
| SUM |
Print report
Information about where the report can be printed from.
From Report Tool
It is possible to select a standard set of content to be printed based on the information extracted from the report.
An option is also provided to save the selection.
Figure 4: Print report setup - Report tool
From Project Manager
The report is accessible for printing directly from the model viewer.
Figure 5: Print report setup - Project Manager
Example
Printed page displayed below in Excel.
Figure 6: Excel report page