Introduction

The report summarises a list over elements in the project, with quantity, size, weight, area, volume and placement based on floors. 

Design report that can be printed from Report Tool.

Report Setup

General report setup. All the fields have to be filled as it prints a sum row at the end of each page.

1585298696534-333.png

Page max X and Page max Y defined the maximum size of the report page.
The x-axis is the columns A, B, C, and etc. and the Y-axis is the rows 1, 2, 3, and etc.

Continuous Header is defined in which row the header and footer start, and in this case, it starts from row 0.

Continuous start row(in this case it is row 11) is where the main info starts and ends in the Continuous end row(in this case it is row 40)
And in row 41 we have the summary for each page

Header setup: 
Here is how the header is set up for this report.

1585298794955-707.png

As you can see we have those x and y values for each field, so the program knows where to put the specific information into the report.

As mention above the Continuous header starts at row 0 to row 10 in the Y direction.

Here are the fields that can be added to the Header and footer:

FieldsDescription
BUILDING 
DIVISION 
FACTORY 
PHASE 
PROJECT 
PROJECT_SUMMARY 
PROJECT_TRIMED 
REPORT_NAME 
REPORT_PAGE_NUMBER 
REPORT_PRINT_DATE 
REPORT_REVISION 
REPORT_REVISION_DATE 
REPORT_TITLE 
SELECTION_PRODUCT 
USER_DIVISION_CITY 
USER_DIVISION_COUNTRY 
USER_DIVISION_DESCRIPTION 
USER_DIVISION_FAX 
USER_DIVISION_NAME 
USER_DIVISION_PHONE 
USER_DIVISION_STREET 
USER_DIVISION_ZIPCODE 
USER_MOBILE 
USER_NAME 
USER_PHONE 
USER_SIGNATURE 
USER_TITLE 

Selection setup:
the standard setup for the selections.

Continuous setup:

Here in Continuous setup is where you set up all the information about holes in this case.

1585298893834-991.png

As you can see, here you define only one row because this row will be the bases for this report, from row 11 to 40 like shown further up. 

The fields you can add to this section are listed below.

FieldsDescription
ANGEL_LEFT_SIDE 
ANGEL_RIGHT_SIDE 
BOUNDING_BOX_AREA 
BRACING 
BRACING_SIDE 
BUILT_THICKNESS 
CAST_TYPE 
CHANGED_IN_DATABASE 
DESIGNATION 
DRAWING_APPROVED_DATE 
DRAWING_DESIGNED_BY 
DRAWING_DESIGNED_DATE 
DRAWING_NAME 
DRAWING_REVISION 
DRAWING_REVISION_DATE 
DRAWING_SCALE 
DRAWING_STATUS 
ELEMENT_GRP 
ELEMENT_MARK 
ELEMENT_PROJECT 
ELEMENT_REVISION 
ELEMENT_TYPE 
EXPOSURE_CLASS 
FACTORY 
FORM_WIDTH 
GROSS_AREA 
HEIGHT 
LENGTH 
LENGTH_ROUNDEDUP 
LIFT 
MASS 
MASS_INNER_PANEL 
MASS_OUTER_PANEL 
MATERIAL 
MAX_PRESTRESSING 
MIN_DIST_BOTTOM_STRAND 
NBR_CIM_GROUP 
NET_AREA 
NUMBER_OF_ELEMENTS 
NUMBER_OF_ELEMENTS_0 
PRODUCT 
PRODUCT_STRANDPTN 
RC_LAYOUT 
RC_TEMPLATE 
REMARK 
REPORT_REVISION_DATE 
STRANDPTN 
STYLE 
TOLERANCE 
TOP_LENGTH 
TOP_LENGTH_ROUNDEDUP 
TOP_WIDTH 
VOLUME 
VOLUME_INNER_PANEL 
VOLUME_INSULATION 
VOLUME_LOCK 
VOLUME_OUTER_PANEL 
WEIGHT 
WIDTH 
WIDTH_HEIGHT 

Print report

From Report Tool
It is possible to make the normal selection on what to print, based on the information you want to get out of the report.

You also have the option to save your selection.

1585300255098-729.png

Example

Here you can the first page of 3 for this project I have open.

1585300316264-846.png

Download

You can download the report template here

Tags:
Created by Oskar Kristinsson on 2020/03/27 09:06
Copyright 2018 StruSoft AB
IMPACT Documentation