Transport Label
Introduction
The transport label report contains information about the QR-code and transport number.
Report Setup
General report setup. All the fields have to be filled if you need a sum row at the end of the page.
Page max X and Page max Y defined the maximum size of the report page.
The X-axis is the columns A, B, C etc. The Y-axis is the rows 1, 2, 3 etc.
Continuous Header Row defines in which row the header and footer start, and in this case, it starts from row 10.
Continuous Start Row (in this case from row 11) is where the main information starts and Continuous End Row (in this case until row 40) is where the main information ends.
If the last field is filled a summary for each page will be created at the end of the page.
Header setup:
Here is how the header is set up for this report.
As you can see we have different X and Y values for each field. This is done so the program knows where to put the specific information into the report.
As mention above, the continuous header starts at row 10 to row 10 in the Y direction.
Here are the fields that can be added to the Header and Footer:
| Fields | Description |
| ADDRESS_TABLE | |
| BUILDING_OWNER_CITY | |
| BUILDING_OWNER_NAME | |
| BUILDING_OWNER_STREET | |
| BUILDING_OWNER_ZIPCODE | |
| BUILDING_SITE_CITY | |
| BUILDING_SITE_NAME | |
| BUILDING_SITE_STREET | |
| BUILDING_SITE_ZIPCODE | |
| CONTACT_EMAILADRESS | |
| CONTACT_FIRSTNAME | |
| CONTACT_LASTNAME | |
| CONTACT_MIDDLENAME | |
| CONTACT_NAME | |
| CONTACT_PHONE1 | |
| CONTACT_PHONE2 | |
| CONTACT_PHONE3 | |
| CONTACT_TABLE | |
| CONTACT_TITLE | |
| LOADING_DURATION | |
MAX_ELEMENT_HEIGHT | (New in Q2/2023) |
MAX_ELEMENT_LENGTH | (New in Q2/2023) |
MAX_ELEMENT_WIDTH | (New in Q2/2023) |
| UNLOADING_DURATION |
Selection setup:
The standard setup for the selections.
Continuous setup:
No Continuous setup for this type of report.
Print report
From Transport Planning
This report can be printed from the Project Manager as shown here and also from the Resource Manager.
You right-click on a transport and select print "Transport Label"
Example
