Settings II

Last modified by Kristofer Hellman on 2019/02/15 16:03

IMPACT Resource Manager settings are vital in setting up and maintaining the company production settings and environment. Settings are divided into two sections, this is section II. In this section, the tree view settings are described, see figure 1 for the tree view.

1549547604001-526.png

Figure 1, Project Manager settings tree view

There are 15 different possible selections in the tree view, and they are hereby presented one at a time.

Addresses

Addresses present an overview of the stored addresses in the system. This is where the address administrator can add and delete addresses, see figure 1.

1549548316045-666.png

Figure 1, Addresses

There are two major parts of this view, a filter and a presentation of the filtered addresses. The filter options are:

  • Name
  • Type
    • Delivery Address
    • Shipper
    • Consignee
    • Other
    • <All>
  • Description
  • Country
  • City
  • Street

When not using the options in the filter, all addresses will be displayed after pressing the refresh button.

Agents

Agents present an overview of the available agents in the system, see figure 2.

1549548921903-500.png

Figure 2, Agents

The agents view contains two major parts, the filter, and the agents view. The filter options are:

  • Name
  • Type
    • Transport Company
    • Driver
    • Contact
    • Other
    • <All>
  • Personnr
  • First Name
  • Last Name

When not using the options in the filter, all agents will be displayed after pressing the refresh button.

Working Calendar

The Working Calendar contains two major parts, Working Days and Invalid Days for each Division, please see figure 3.

1549550354179-910.png

Figure 3, The Working Calendar

In the working calendar, working days and holidays can be specified. There are two kinds of days for the calendar:

  • Working Days
    • Days when the selected Division is up and running, weekends may be specified as a holiday (day-off)
  • Invalid Days
    • Days where the selected Division is either on holiday (day-off) or working

The settings made in the working calendar are made by Division and therefore must be set for each division separately. The settings made here influence the cast calendar and the setup will be visible when doing cast planning.

Factories

In Factories, each production factory is added and thereby assigned a Production Factory id, see figure 4.

1549551734224-887.png

Figure 4, Production Factories

Here, the following fields are available for each factory:

  • Name
  • External Name
  • Main Address
  • Pickup Address
  • Invoice Address
  • CE Code
  • Transport Code
  • Tran Gan Code
  • Text1
  • Text2
  • Text3
  • Text4
  • Description
  • Production Factory Id

After adding a factory with the "+"-button, the fields may be edited.

Divisions

The Divisions section is where production divisions are added, see figure 5.

1549552732876-510.png

Figure 5, Production Divisions

When a new production division is added, it is given a unique division id. Add a division by pressing the "+"-button. Each division contains the following fields:

  • Name
  • Division Type
    • Production
    • Transport
    • Other
  • Factory
  • Manager
  • Address
  • Description
  • Division Id

The set field data is then saved by pressing the "Save Changes"-button that appears after the creation of a new division.

Divisions also contain the possibility to add the number of hours available during a time period and the number of active working shifts during this period, see figure 6. Especially take note of the Production Date filter, this can be used to plan and view specific time periods.

1549566662583-245.png

Figure 6, Divisions time and shift specification (left), Division user administration (right)

Adding a third shift with 160 allocatable work hours during a five day period can be accomplished by right clicking in the Available Times window, see figure 7 and 8.

1549567093766-698.png

Figure 7, adding a new shift, new

1549567151399-757.png

Figure 8, adding a new shift, creating newly available times

Cast Units

Cast Units is where cast units are added to a specific production Division, hence, before creating cast units, a production division must be created.

1549568416406-884.png

Figure 9, Cast Units, note that a division is selected

There are three different types of cast units:

  • Bed
  • Table
  • Pallet

If the factory is using strand reinforcement, the bed strand type is to be changed from Standard to Bed, please see figure 10.

1549980315873-207.png

Figure 10, Cast Units, Strand Type set to Bed and five strands added

The strands have the following settings:

  • Used (check or unchecked)
  • Position (1, 2, ..., n)
  • X (X-coordinate)
  • Y (Y-coordinate)
  • Dimension (stand diameter in milimeters)
  • Quality
  • Prestressing (MPa)

Element Groups

For each factory, element groups may be created. Each element group contains:

  • Name
  • Description
  • Unit
  • BBC (Tickbox for True/False)
  • CE (Tickbox for True/False)
  • EN Code (for example SS-EN XXXXX)
  • EN Description

1549985263989-820.png

Figure 11, Element Groups

Storages

Storages are where Storages are added to a specific Factory, hence, before a storage unit, a factory must be available, see figure 11.

1550069848837-694.png

Figure 11, Storages

Each storage must have a name, description is optional.

Stack Template

Stack template is where predefined stacks can be defined, these can later be used in the stack module, see Figure 12.

1550155064847-552.png

Figure 12, Stack Templates

The following fields are available:

  • Description
  • Type
  • Max Length
  • Max Width
  • Max Mass
  • Max Element Count

Transport Vehicle

Transport Vehicles is where predefined transport vehicles are defined, please see figure 13.

1550155242486-498.png

Figure 12, Transport Vehicles

The following fields are available for the vehicles defined:

  • Name
  • Vehicle Type
  • Description
  • Max Length
  • Max Width
  • Max Height
  • Max Mass
  • Max Element Count

Transport Template

Transport template is where predefined transport units such as trailers, is defined. After a transport template is added, vehicles and trailers can be added to that template, see figure 13.

1550155879786-184.png

Figure 13, Transport Templates - Vehicles

In vehicles, the transport vehicles defined in Transport Vehicle can be added to the Transport Template. For each template, transport actors can be added, see figure 14.

1550156017959-312.png

Figure 14, Transport Templates - Transport Actors

Transport Cost

Transport Cost is where the names and validity time range of transport price lists can be stored. Available fields are:

  • Valid From
  • Valid To
  • External Name
  • Description

Number Generator

Number generator is where the ID numbers for delivery notes are generated. These numbers can be controlled by changing the following fields:

  • Upper Bound
  • Lower Bound
  • Next Number

Status

Status is where the status of the precast elements is configured, see figure 15.

1550242211805-134.png

Figure 15, Status

The following fields can be configured:

  • Status Id
  • Description
  • Status Type
  • Color

The first two are fully customizable, where the selection for Status Type and Color are selected from a predefined list:

  • Status Type
    • No status
    • Not ready for production
    • Ready for production
    • Produced
    • On storage
    • Planned for delivery
    • Call-off
    • On Waybill
    • Delivered
  • Color
    • White
    • Red
    • Orange
    • Brown
    • Yellow
    • Green
    • DarkGreen
    • Cyan
    • Blue
    • Navy
    • DarkBlue
    • Magenta
    • Purple
    • Black
    • Gray

Message Log

The message log is where info messages and errors are reported, see figure 16. The is also a search filter to search the log, see figure 16.

1550242627493-227.png

Figure 16, Message Log and filter

 

 

Tags:
Created by Kristofer Hellman on 2019/02/07 14:49
Copyright 2018 StruSoft AB
Impact Documentation