Beam variables
Last modified by Adam Carlson on 2021/11/30 10:49
Below are the variables that affect Beams in IMPACT for AutoCAD
| Variable | Short description | Default Value |
|---|---|---|
| DWGBEAMDIMENSION | Enable full width/length dimensioning of beam top and section views. | |
| DWGBEAMSECTIONCIM | Sets if "Show cast-in materials" should be marked as default in the section | 1 |
| DWGBEAMSECTIONCIMALL | Sets if "Include all cast-in materials" should be marked as default in the section | 0 |
| DWGBEAMSECTIONRC | Sets if "Show reinforcement" should be marked as default in the section | 1 |
| DWGBEAMSECTIONRCALL | Sets if "Include all reinforcement" should be marked as default in the section | 0 |
| DWGBEAMSECTIONCIMTOLERANCEAFTER | Sets the default cast-in material "tolerance after" for the section | 200 |
| DWGBEAMSECTIONCIMTOLERANCEBEFORE | Sets the default cast-in material "tolerance before" for the section | 50 |
| DWGBEAMSECTIONRCTOLERANCEAFTER | Sets the default reinforcement "tolerance after" for the section | 10 |
| DWGBEAMSECTIONRCTOLERANCEBEFORE | Sets the default reinforcement "tolerance before" for the section | 10 |
| DWGDIMADDDIMNBRSECTIONBEAM | Set value to 1 to add dimension reference number for sections. Set value to 0 if not relevant for your production drawings. | 0 |
| DWGSHOWSINGLESECTIONNAMEBEAM | Shows the name of the beam section even if there's only one section for the element if set to 1. | 0 |
| DWGTEXTBEAMENDWIDTH | Writes out a text in front of the width of the end defined in the properties | Width |