DWGCOLUMNSECTIONCIM
Last modified by superadmin on 2021/05/04 17:11
Sets if "Show cast-in materials" should be marked as default in the section.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| DWGCOLUMNSECTIONCIM | 0 | 1 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| DWGCOLUMNSECTIONCIM | 0 | 0 |
When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place.
The settings in Standard Admin serves as default settings when creating a new shop drawing or a new section.
Once a section is created it will have its own settings which can be different from setting in Standard Admin.
