DWGCOLUMNSECTIONCIMALL
Last modified by Dennis Knudsen on 2020/04/17 10:00
With DWGCOLUMNSECTIONCIMALL is it possible to set if the section of the column should show all the CIM in the column or use the tolerance before/after.
Example of the IMPACT default setting:
Variable | Type | Value |
---|---|---|
DWGCOLUMNSECTIONCIMALL | 1 | 0 |
Example with a user default setting:
Variable | Type | Value |
---|---|---|
DWGCOLUMNSECTIONCIMALL | 1 | 1 |