DWGCIMVIEWSCALE
Last modified by superadmin on 2021/05/04 17:17
Possibility to determine the scale in the drawing view (33) of project CIM used in the element.
If the variable is not there, the scale is set to 1.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| DWGCIMVIEWSCALE | 0 | 1 |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| DWGCIMVIEWSCALE | 0 | 2 |
When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place.
The settings in Standard Admin serves as default settings when creating a new shop drawing or a new section.
After the change, the drawing must be redrawn or updated.
