DWGENDCAPVIEWLEVELOFDETAIL

Last modified by Adam Carlson on 2023/03/03 07:53

The function "Line-up Endcap" will line up the endcaps used in the project. The function is available in the element, elevation & plan tab.

element111.pngelevation111.pngplan111.png

Now it is possible to decide if the level 1 or 2 symbol should be shown.

The maximum number of endcaps displayed in a row when using "Line-up Endcap" can be set using the variable DWGENDCAPLINEUPMAXCOLUMNS.

1.png2.png

Example of the IMPACT default setting:

VariableTypeValue
DWGENDCAPVIEWLEVELOFDETAIL01

line up 1.png

Example with a user default setting:

VariableTypeValue
DWGENDCAPVIEWLEVELOFDETAIL02

line up 2.png

When a setting is changed in Standard Admin, the button "Refresh Settings and Properties" must be run for the changed settings to take place. 

The settings in Standard Admin serve as default settings when creating a new shop drawing or a new section.

After the change, the drawing must be redrawn or updated.

refreshbuttonrefreshbutton111.png

Tags:
Copyright 2024 StruSoft AB
IMPACT Wiki