DWGTEXTRECESSMARKPREFIX
Last modified by superadmin on 2021/05/04 17:16
Sets the prefix for holes in the elevation view and the schedule if "Show in hole specification on shop drawing" is ticked.
As seen in the default setting, there are no numbers or any text in front of the numbering of the holes.
Example of the IMPACT default setting:
| Variable | Type | Value |
|---|---|---|
| DWGTEXTRECESSMARKPREFIX | 0 | - (no value) |
Example with a user default setting:
| Variable | Type | Value |
|---|---|---|
| DWGTEXTRECESSMARKPREFIX | 0 | WIKIH |
